AKUVOX E12W DOORBELL / WIFI / Cloud Based / Bluetooth / SIP

• Body Material: Plastic 
• Camera: 2M pixels automatic lighting 
• Button: 1 call button with backlight 
• Wiegand port: Support 
• RF card reader: 13.56MHz 
• Light sensor: 1 
• Relays out: 1 
• Inputs: 2 
• Micro SD card slot: 1 
• Microphone: -36dB 
• Speaker: 8Ω / 1.5W
• Ethernet port: RJ45 10/100Mbps adaptive 
• BLE: Yes 
• WiFi: IEEE802.11b/g/n 2.4GHz 
• Vandal alarm: Yes 
• 802.3af Power-over-Ethernet 
• 12V DC connector (if not using PoE) 
• Power: 12V / 1A 
• Water-proof & Dust-proof: IP65 
• Installation: Wall-mounted 
• Size: 146x70x23mm 
• Working Humidity: 1090% 
• Working Temperature: -40°C 60°C 
• Storage Temperature: -40°C 70°C

• SIP v1 (RFC2543) SIP v2 (RFC3261) 
• Narrowband audio codec: G.711a G.711μ G.729 
• Broadband audio codec: G.722 
• DTMF: In-band out-of-band DTMF (RFC2833) SIP Info 
• Echo Cancellation 
• Voice Activation Detection 
• Comfort Noise Generator

Video

• Sensor: 1/2.7” CMOS 
• Pixels: CIF QCIF VGA 4CIF 720p 1080p 
• Video codec: H.264 H.265 
• Video resolution: up to 1920x1080p 
• Max. image transfer rate: 1080p – 25fps 
• Viewing angle: 123°(H) / 69°(V) 
• White LEDs for picture lighting during dark hours with internal light sensor

Door Entry Feature

• Relays controlled individually by DTMF tones 
• Camera permanently operational 
• Auto-night mode with LED illumination 
• White balance: auto 
• Minimum illumination: 0.1LUX

Networking & Protocol 

• Protocols support: IPv4 HTTP HTTPS FTP SNMP DNS NTP RTSP RTP TCP UDP ICMP DHCP ARP

Deployment & Maintenance 

• Auto-Provisioning 
• Web management portal 
• Configuration backup / restore 
• Entry log export 
• Access table export / import 
• Firmware upgrade 
• System logs (include door access logs)

Application Scenario

• Apartment/flat intercom with door access control
• Remote site entry over Internet