• On sale!
  • Out-of-Stock

RBTEC RBIROC1Z1000 Kit for a single zone of IronClad up to 3

0 Review(s) 
RBIROC1Z1000 RBTEC Kit for a single zone of IronClad up to 305 mts/1000 RBIROC1Z1000
RBTEC
RBIROC1Z1000
Sorry, This item is out of stock.
$4,712.26
Out-of-Stock

  Security policy

(edit with the Customer Reassurance module)

  Delivery policy

(edit with the Customer Reassurance module)

  Return policy

(edit with the Customer Reassurance module)

RBTEC RBIROC1Z1000 Kit for a single zone of IronClad up to 305 mts/1000

IRONCLAD Fence Alarm System

Perimeter Security Made Easy Reliable and Affordable.
The easiest and most reliable fence sensor cable you ever installed

  • Plug and Deploy - Ready for installation affordable kits.
  • 3 Layers of False Alarm Filtration - Extreme low false alarm rate.
  • Protects fences up 10ft with a single run of cable.
  • No training or special tools needed comes with installation manual.
  • No calibration - The system self-calibrates.
  • Maintenance free - 2 years warranty on the sensor cable.
  • 11 Levels of sensitivity per zone easily adjusted with dip switches.
  • Dry contact relay outputs (NO or NC) can be connected to any alarm system/DVR.
  • Ideal for installation on chain link fences or concertina coils.
  • Optional: Weather Station Stainless steel twist ties Gate connector.

  The Ironclad is a sensor cable that is attached to the fence to detect any cutting climbing lifting or jumping off the fence. A single run of the cable in the middle of the fence will detection the whole height of the fence up to 10ft against any intrusion attempt.
The system designed to connect to any alarm system and is able to retrofit to old or new burglar alarms/DVR/NVR/ systems.

Fully wrapped by stainless steel braid the Ironclad is Ideal for installation on wire fences razor wires and concertina coil.

The system utilizes 3 layers of false alarm filtration - Algorithm of detection based on the frequency of vibrations detecting only vibrations associated with intrusion 11 levels of sensitivity easily adjusted with dip switches and a weather station to avoid false alarms caused by weather condition.

Kit includes:

1  Iroc250
1  Local analyzer unit LPU304
1  Weaterproof enclosure JB4


2024-12-26 07:35:51

Page: 5

RBIROC1Z1000 RBTEC Kit for a single zone of IronClad up to 305 mts/1000 RBIROC1Z1000

RBTEC
RBIROC1Z1000

Reviews

Write your review

RBTEC RBIROC1Z1000 Kit for a single zone of IronClad up to 3

RBIROC1Z1000 RBTEC Kit for a single zone of IronClad up to 305 mts/1000 RBIROC1Z1000

Write your review