WI-TEK WIPOE5548V60W HI- PoE injector 60W / 48V Power Supply

WIPOE5548V60W WI-TEK HI- PoE injector 60W / 48V Power Supply Range of up to 100 meters WI-POE55-48V-60W
WI-TEK
WIPOE5548V60W
Hurry up! only 572 items left in stock!

WI-TEK WI-POE55-48V-60W 60W Hi-PoE Injector - Supports PoE 802.3af/at/bt (48V) / Transmission range up to 100 meters / Designed for CCTV and networking solutions

<-- Wi-Tek WI-POE55-48V-60W Compatible ERP (TinyMCE) Inline styles table layout EN -->
<-- HERO -->

Wi-Tek  ·  PoE Injector

WI-POE55-48V-60W
60W Hi-PoE Gigabit Injector

IEEE 802.3af/at/bt compliant Hi-PoE injector delivering up to 60 W over a single Ethernet cable — power your APs IP cameras and IP phones anywhere on your network up to 328 ft (100 m) away with zero configuration.

<-- BADGE -->

802.3af    802.3at    802.3bt   ·   60 W MAX OUTPUT  ·  PLUG & PLAY

Wi-Tek WI-POE55-48V-60W
<-- STATS BAR -->

60 W

Max PoE Output

328 ft

Max Range (100 m)

1 Gbps

Port Speed

48 V

PoE Voltage

<-- BODY -->
<-- GALLERY -->
WI-POE55-48V-60W
WI-POE55-48V-60W detail
WI-POE55-48V-60W ports
<-- SECTION: Overview -->
Overview  

The WI-POE55-48V-60W fully complies with the IEEE 802.3af/at/bt standard and is compatible with all 802.3af/at/bt PoE powered devices — letting you deploy APs IP cameras IP phones and more anywhere on your network even where no power outlet is available.

With a maximum Hi-PoE output of 60 W at 48 V it covers the most demanding powered devices including PTZ cameras and high-gain outdoor APs. Data and power travel over a single Ethernet cable for up to 328 ft (100 m). Completely plug-and-play — no software no configuration no hassle.

<-- USE CASES STRIP -->

Typical Applications

<-- IP Camera --> <-- Wireless AP --> <-- IP Phone --> <-- IoT Devices -->
CAM

IP Camera

PTZ & fixed CCTV

AP

Wireless AP

Indoor & outdoor

TEL

IP Phone

VoIP deployments

IoT

IoT Devices

Access control & sensors

<-- SECTION: Key Features -->
Key Features  

60 W Hi-PoE Output IEEE 802.3af / at / bt 2× Gigabit RJ45 Ports 328 ft Range (100 m) 48 V PoE Voltage Plug & Play — No Config Auto Power Detection AC IN 100–240 V Surface & Wall Mount Jumbo Frame Support

<-- SECTION: Specifications two columns -->
Technical Specifications  
<-- LEFT: PoE / Network --> <-- RIGHT: Power / Physical -->
PoE & Network
PoE Standard IEEE 802.3af / at / bt
PoE Max Output 60 W
PoE Voltage 48 V
PoE Port 1× 10/100/1000 Mbps RJ45
Data Port 1× 10/100/1000 Mbps RJ45
Max Range 328 ft (100 m)
Jumbo Frame Supported
Power & Physical
AC Input 100–240 V AC
Power Supply External adapter
Configuration Plug & Play — none required
Mounting Surface or Wall Mount
Compatible PDs 802.3af / at / bt devices
Auto Detection Auto power negotiation
Operating Temp. 14°F to 131°F (-10°C to 55°C)
Device Dimensions 4.45 × 1.89 × 1.18 in (113×48×30 mm)
Net Weight 0.26 lb (0.12 kg)
Certifications CE FCC RoHS
<-- Cable note -->

  Cable Requirements

Use Cat5e or higher (Cat6 recommended) for full 1 Gbps speed and 60 W PoE at distances up to 328 ft (100 m). Pure copper cable required for reliable Hi-PoE performance.

<-- WARRANTY -->

3-Year Warranty with Epcom

Covered against defects in materials and workmanship under normal use conditions.

<-- /body -->
<-- /wrapper -->

2026-08-05 07:35:09

Page: 1

WIPOE5548V60W WI-TEK 60W Hi-PoE Injector - Supports PoE 802.3af/at/bt (48V) / Transmission range up to 100 meters / Designed for CCTV and networking solutions WI-POE55-48V-60W

WI-TEK
WIPOE5548V60W