ACTISENSE DX28 NMEA 0183 Dual expander

ACTISENSE DX-28 NMEA 0183 Dual expander

The DX28 Expander is a 2-channel signal splitter/amplifier for NMEA 0183 data signal distribution. It can be configured as one 1-in x 8-out expander two 1-in x 4-out expanders or an autoswitching expander. The two inputs are completely independent and can operate at the same or different baud rates up to 38 400. The selectable auto-switching feature enables automatic switchover to the AUXILIARY input when signal is lost from the PRIMARY input. A bicolor (green/red) status LED on each input shows data activity and a third LED (yellow) provides “overcurrent” fault indication.

SPECIFICATIONS

• Input impedance 2K ohms
• Input sensitivity 2V differential
• Input baud rate 38 400 max.
• Output level (RS-422) 3.5v < 500 ohms
• Supply voltage 10 – 30 Vdc
• No-load current <20 ma.
• Full-load current 100 ma.
• Overcurrent indication > 100 ma.
• Operation Temp (degC) 0 – 50
• Humidity Range 0-100% (non-condensing)
• Case Packaging ABS Plastic

Size (inches) 2.5 x 3.5 x 1.0

Weight (ounces) 3.0

2024-11-06 13:25:53

Page: 5

DX28 ACTISENSE NMEA 0183 Dual expander DX-28