SYSCOM TOWERS SEST35G Tower Stabilizer for STZ-35G Sections

SYSCOM TOWERS SEST-35G Tower Stabilizer for STZ-35G Sections Hot-dip Galvanized

A stabilizer or anti-twist arm as is also known is an element designed to hold the tower at a certain height to prevent movement due to strong wind currents

Unlike a flange (which is held at one point on each side of the tower) a stabilizer is held at 2 points per side i.e. at the same height it will be held at 6 points which prevents excessive twisting in the tower and a better structure rigidness.

When do you install a stabilizer

A stabilizer is not a required piece when assembling a tower. Generally a stabilizer is installed when:
- If there is an antenna with a large drag surface (equal or greater than 1 m of diameter).
- When there are strong winds due to terrain conditions.
- In high precision wireless links

It is recommended to replace the installation of a flange when adding a stabilizer since we remember that the more cables we put to the tower the heavier it will be and the more cargo we will deliver to the ground.

Physical Characteristics:
Material: Electrolysis galvanized steel.
Compatible with section: STZ35. 
Side width: 70 cm.
Weight: 12.45 Kg.

Device includes:
3   - Subjection brackets with nuts.
3   - Corners
3   - Channels
24 - Screws with safety nuts for assembly.

Product Manufactured Under ISO 9000 Norms

Installation image

2024-12-26 16:25:17

Page: 2

SEST35G SYSCOM TOWERS Tower Stabilizer for STZ-35G Sections Hot-dip Galvanized SEST-35G