LINKEDPRO BY EPCOM EP7305H Adjustable Steel Strapping Bandin

LINKEDPRO BY EPCOM EP7305H Adjustable Steel Strapping Banding Tool Manual Band Plier Spin Banding

Main Features

• Body made of durable steel.

• Compatible with 3/4" strap (LP-SSB-3470) and 5/8" strap (LP-SSB-5870).

• Ideal for securing straps for aerial fiber systems and cabinets or structures on poles.

Instructions for Use:

• Measure the circumference of the pole with a tape measure and add 15 to 25 cm depending on the type of equipment being installed.

• Position the strap on the equipment to be installed wrap it around the pole and place the buckle making a small bend to secure it to the strap with pliers.

• Insert the strap into the strap tensioner channel and begin tightening using only hand strength.

• Once the tensioning is complete lock the strap by pushing the tensioner against the buckles teeth pull the cutting lever and remove the tool.

• Quickly secure the remaining strap with strap clamps (gently tapping them with a hammer).

Additional Tools Recommended for Installation:

• Hammer

• Sheet metal cutting pliers

• Strap: 3/4" (LP-SSB-3470) or 5/8" (LP-SSB-5870)

• Buckles: 3/4" (LP-SSBT-34) or 5/8" (LP-SSBT-58)

• Gloves

Video: How to Use the Strap Tensioner

Instructions:

• Measure the circumference of the pole with a tape measure and add 15 to 25 cm depending on the type of equipment being installed.

• Position the strap on the equipment to be installed wrap it around the pole and place the buckle making a small bend to secure it to the strap with pliers.

• Insert the strap into the strap tensioner channel and begin tightening using only hand strength.

• Once the tensioning is complete lock the strap by pushing the tensioner against the buckles teeth pull the cutting lever and remove the tool.

• Quickly secure the remaining strap with strap clamps (gently tapping them with a hammer).

2026-06-09 07:35:07

Page: 1

EP7305H LINKEDPRO BY EPCOM Adjustable Steel Strapping Banding Tool Manual Band Plier Spin Banding EP7305H