DORMAKABA YG80 11 240 Lbs Bolt Lock Force / Weather / Suppor

DORMAKABA YG80 11 240 Lbs Bolt Lock Force / Weather / Supports Corrosion / Extreme Weather

Features

• With an 18 mm (.705”) diameter stainless steel bolt pin and reinforced strike design the YG80 has a holding force of 11 240 lbs.
• Concealed mounting bolts under the lock’s cover which cannot be removed without triggering the tamper detection monitor.
• Completely weatherproof. Ingress protection to IP67.
• Aluminum lock body for superior corrosion resistance.
• Built-in heater for continued functionality in colder climates the YG80 can handle any environment it is placed in.
• Complete Monitoring – YG80 can truly become a part of the access control system with a range of output signals including: bolt locked and unlocked position door position and tamper detection.
• Low current consumption.
• With the heater disabled the YG80 will draw as little as 50 mA in standby  and only 1 000 mA in operation at 12VDC. (Heater 24VDC only).
• Integrated access control system capabilities.
• Selectable fail safe / fail secure modes three user selectable control methods  and multiple attempts to lock or unlock ensures that the YG80 is ready for a wide range of application requirements.
• A symmetrical design means the YG80 can be installed both horizontally and vertically in indoor and outdoor environments.
• The included 3 meter (9.04’) flying cable ensures easy connection for all the monitoring control and the 12-24VDC power supply.

Specifications

• Door gap – 15 mm (.590”) Max
• Static strength – 11 240 lbs.
• Dynamic strength – 148 ft-lbs.
• Endurance – 300 000 cycles
• Voltage at lock – 12-24 VDC /- 15%
• Auto relock – Will attempt to lock or unlock 3 times if obstructed during operation
• Current usage – Standby current: 50mA 12V; 40mA 24V; 1.6A 24V with heater on. Maximum current: 1.0A12V; 0.5A 24V; 2.0A24V with heater on
• Monitor switch ratings – 24VDC 0.25A

Environment:

• IP67 Rating – suitable for indoor and outdoor use
• Cold - – 35 degrees C
• Dry heat - 70 degrees C
• Corrosion – 240 hours salt spray
• Certifications and listings: FCC – Title 47 part 15 subparts A & B – Class B device ISED (IC) – ICES-003 – Class B device UL – UL294 CSA 22.2 No 204 CE – EMC 2014/30/EU RoHS 2011/65/EU

Operation Video:

2024-12-26 16:25:53

Page: 5

YG80 DORMAKABA 11 240 Lbs Bolt Lock Force / Weather / Supports Corrosion / Extreme Weather YG80