TYCON POWER PRODUCTS TP1224G 10/100/1000MB Passive PoE Inser

TYCON POWER PRODUCTS TP-1224G 10/100/1000MB Passive PoE Inserter. Power Injector from 12 to 24 Vdc (19 W). Gigabit Converter 802.3af/at

• DC POE Output Voltage (/-2.5%): 12V or 24V (switchable)
• Overvoltage Protection: 16V or 28V
• POE Input (IEEE 802.3af/at): 36 - 60VDC
• Output Current: 1A 12V / 1A 24V
• Output Power: 25W Max
• Load Regulation: 5%
• Ripple / Noise: 2%
• EMC Standards: FCC Class B NE55022 Class B
• Safety Standards: UL1950 CSA 22.2 & TUV EN60950
• Operating Temperature: -30 to 60°C (-22 to 140°F)
• Operating Humidity (RH): 5% - 90%
• Storage Temperature: -40 to 80°C (-40 to 176°F)
• Dimensions (LxWxH): 4.92x2.95x1.5in (125x75x38mm)

FEATURES:
- Converts 48V 802.3af/at POE Input to 12V or 24V POE Output
- Run non-compliant equipment on 802.3af/at POE switches
- POE output switchable between 12VDC and 24VDC
- Remotely Power Equipment thru CAT5 Cable up to 100m
- Short Circuit Over Current and Over Voltage Protection
- High Temperature Operation Gigabit Ethernet Operation
- Compact size – Floor / Desktop / Wall Mount

APPLICATIONS:
- Wireless Access Points and Client Devices
- IP Phone and Security Camera Systems

DESCRIPTION:
The TP-1224G is a unique Gigabit Power Over Ethernet adapter that converts an 802.3af/at 48VDC POE input into a 12V or 24VDC regulated non-compliant POE output. The POE output voltage is an external jumper selectable and capable of up to 25W power output. The POE input is IEEE 802.3af/at compatible so the TP-POE-1224G will work with standard 802.3af/at compliant POE switches or routers. The TP-POE-1224G enables the powering of non-compliant POE devices from standard 802.3af/at POE switches which eliminates the extra expenses usually required to power non-compliant equipment.

They accept Gigabit data-in and 802.3af/at POE to a shielded RJ45 Jack and provide Gigabit data-out and 12V or 24V POE on the shielded RJ45 output jack. They work by supplying power to the remote device on the unused Ethernet pins 4 5(V) and 7 8(V-). The Ethernet spec supports distances up to 100m (328 feet).

They have various protections for the surge short circuit overload and overvoltage.
If the remote device does not support power over Ethernet splitters (POE-SPLT-S) are available to split the data and DC voltage at the remote device.

If the remote device requires reverse voltage the POE-XOVER cable can be used.

DEVICE PINOUTS:
RJ-45 Input (Data & Power)                       RJ-45 Output (Data & Power)
Pin   Symbol             Description                Symbol            Description
1  BI_DA Vin /-  Data RX / Power(/-)   BI_DA          Data RX()
2  BI_DA- Vin /-   Data RX- / Power(/-)    BI_DA-            Data RX(-)
3  BI_DB Vin /-  Data TX / Power(/-)   BI_DB           Data TX()
4 BI_DC Vin /-  Data RX / Power(/-)    BI_DC Vo   Data RX() DC power()
5  BI_DC- Vin/-   Data RX- / Power(/-)     BI_DC- Vo   Data RX(-) DC power()
6 BI_DB- Vin /-   Data TX- / Power(/-)     BI_DB- Data TX(-)
7 BI_DD Vin/-   Data RX / Power(/-)    BI_DD Vo-   Data RX() DC power(-)
8 BI_DD- Vin/-    Data RX- / Power(/-)     BI_DD- Vo-    Data RX(-) DC power(-)

2024-12-27 07:35:13

Page: 1

TP1224G TYCON POWER PRODUCTS 10/100/1000MB Passive PoE Inserter. Power Injector from 12 to 24 Vdc (19 W). Gigabit Converter 802.3af/at TP-1224G